Browse Categories

Paragon SC-1 Silver & Glass Kiln

<< Previous in Paragon Kilns Next in Paragon Kilns >>

MSRP: $775.00
Price: $659.00
You Save: $116.00
Manufacturer: Paragon Industries
Part No: 0P211J1B00

More Options

Want a custom kiln color?
free shipping

 Paragon SC-1 Silver & Glass Kiln

FREE UPS GROUND SHIPPING!

The digital SC-1 kiln fires PMC, Art Clay Silver, decals, china paint, and glass up to 2000°F. The SC-1 is smaller than the SC-2 and therefore very convenient as a traveling kiln. Take the SC-1 to seminars and set it up in just minutes. This may be the kiln of choice for those silver clay artists who have limited work space or who make only a few PMC or Art Clay Silver pieces per session. Fire them without wasting the space of a larger kiln.

The SC-1 fires automatically at the rate and temperature you enter. A large, brightly lit display prompts for firing rate, temperature and hold time. Use the hold feature to automatically soak any type of PMC and Art Clay Silver to their recommended times.

 The high-tech ceramic fiber firing chamber is wrapped in a steel inner case. The outer steel case remains cool due to the layer of air between it and the inner case. In addition, the case is slotted for air circulation. Electrical components, located in the base, stay cool even during long hold times.

The fast-firing element is embedded in the firing chamber shell. Each SC-1 includes a 1/4” thick ceramic fiber shelf.

SC-1 Features
  • On/off safety switch
  • Built-in base; no extra stand needed
  • Door opens 180 degrees for easy loading
  • The case is slotted for air circulation
  • Electrical components in the base stay cool even at extended hold times
  • Includes a 1/4” thick ceramic fiber shelf

The SC-1 uses the same reliable Sentry Xpress 3-key controller and electrical components found on our larger SC-series kilns. The controller is packed with features. It includes two modes: Single Speed and 8-segment Ramp-Hold.

Features of the SC-1 Sentry Xpress 3-key Controller

  • Design programs with up to 8 segments (steps) in Ramp-Hold mode.
  • Fire to a single temperature at a single speed in the simplified Single Speed mode.
  • Ramp-Hold mode can store 4 programs.
  • Skip a segment in Ramp-Hold during firing without having to stop the kiln to reprogram.
  • Change the target temperature in Ramp-Hold during firing without having to stop the kiln to reprogram.
  • Hold (soak) the temperature in both Single Speed and Ramp-Hold. Experiment with Hold to improve color saturation of china paints.
  • Add Hold Time during firing without having to stop the kiln to reprogram.
  • Control both heating and cooling in Ramp-Hold.
  • Program Review lets you check the program you are about to fire.
  • Program the Temperature Alarm to sound when the kiln reaches a specific temperature. Use this to remind yourself to check on the kiln.
  • Temperature display throughout firing and cooling in your choice of °F or °C
  • Thermocouple Offset adjusts the thermocouple readout.
  • Set the Delay to turn on the kiln later to suit your schedule.
  • Error Messages report mechanical problems such as a disconnected thermocouple, stuck relay or broken element.
  • 12 Month Warranty
  • LED Lights show whether you are in program, review, or firing mode.
  • Colorful, illustrated instruction manual. Download it from the “Additional Information” section below to review these features in more detail.

Optional Carrying Case - Select this option above

Why not add a carrying case for your SC-1? Safely carry your Paragon SC-1 kiln to seminars and on vacation. This tough ballistic nylon case is cushioned with 1" foam padding on the top, bottom, and four sides. Includes a webbed 1-1/2" shoulder strap, double carrying handles, and an ID holder on the outer top. Case dims: Outer size: 14" wide x 12" deep x 13" high.

Allow the SC-1 to cool to room temperature before inserting it into the carrying case. Place a sheet of foam packing between the door and kiln for extra protection. 

Specifications

Max. Temperature

2000F
1093C

Amps

5

Phase

1

Watts

600

Nema

5-15R

Breaker Size

15

Circuit Wire Size

14 gauge

TUV tested to CSA and UL Standard 499

N

CE

N

Control Type

Sentry Digital SC-4 Controller

Voltage

120

Hertz

60









Disclaimer: The specifications above assume that the kiln will be plugged into a dedicated circuit. Local electric codes supersede our recommendations.

The pricing and electrical specifications for the above products reflect their design for use in the United States. The International versions of most models will have variations in electrical specifications and price due to consumer safety requirements or electrical regulations.

 

Sides

4

Chamber Volume

0.04 CU.FT.
1.10 litres

Chamber Width

6.00
152 mm

Chamber Depth

3.75
95 mm

Chamber Height

3.00
76 mm

Outer Size

11.00W x 10.00D x 12.25H Inches
279W x 254D x 311H mm

Ship Size

16.00W x 16.00D x 14.00H Inches
406W x 406D x 356H mm

Ship Weight

15.00 Lbs.
6.80 Kg.

Ship Method

This Kiln Ships Via UPS





Part Number

0P211J1B00   * Base Model


Shopping Cart
Your cart is empty.
Mailing Lists