Browse Categories

Paragon TouchnFire 2 Portable Digital Controller

<< Previous in Digital Kiln Controllers Next in Digital Kiln Controllers >>

Price: Starting at $564.00
Manufacturer: Paragon Industries
Part No: TNFII

Product Options

Power:
Controller:

More Options

* denotes required field

Attach a photo of your wall receptacle or kiln plug
OPTIONAL- Send us a photo of your kiln's plug so we send the correct one.
Enter Your Kiln Manufacturer, Model Number, Volts, and Phase*
Manufacturer
Model
Volts
Phase (if noted)

TouchnFire 2 Portable Digital Controller  TNFII


Enjoy the features of Paragon’s Sentry 12-key digital controller on your manual-fire kiln. Works with kilns of any brand or age.

The wall-hanging TouchnFire 2, or TnF 2, plugs into the wall receptacle that your manual-fire kiln is now using. The kiln, in turn, plugs into a receptacle on the TnF 2. To install the thermocouple, which reads temperature, drill a 1/8” hole through the kiln’s firebrick wall. After mounting the thermocouple to the kiln, you are ready to fire. You could also mount the thermocouple through a drilled peephole plug (furnished with the TnF 2; the plug is tapered, however, which does not fit all brands of kilns). If you have a Kiln Sitter, you can continue to use it as an additional safety backup.

IMPORTANT OPTIONS - Select above:

  • The price of the TnF 2 varies depending on your kiln’s amperage. Each TnF 2 will operate on only one type of wall receptacle.

  • Specify the wall receptacle used by the kiln when ordering (i.e. NEMA configuration number 6-50R).

  • Specify whether you want Cone-Fire mode, which can be included at no extra charge.
    (TnF 2’s are ordinarily shipped with Ramp-Hold mode only.)

  • Note that 120 Volt models have the option of a 3-key controller. All 208/240 volt models have the 12-key controller.

 

You will be amazed at the convenience of digital firing. The reliable solid-state Sentry controller continually monitors the firing so you can spend your time productively without closely watching the kiln. (Please remember, however, to check the kiln during firing and to monitor it near the expected shutoff time.) The sealed touch pad keeps out dust and is easy to wipe clean.

The controller has powerful features that you will enjoy using. Yet we have also worked hard to make the controller user-friendly.

Do you ever wonder how much electricity your kiln uses? The digital controller can figure this for you with the press of a button. Find out how little a kiln actually costs to fire. Learn to conserve energy by experimenting with firing speed, load density, etc.

The TnF 2 comes with a drilled peephole plug, thermocouple and instructions. Warranty: two years for all components except the Sentry controller, which carries a 2 ½ year warranty.

Specifications

Max. Temperature

(see your kiln)

Amps

20

Phase

1

Watts

2400

Nema

5-20R

Breaker Size

20

Circuit Copper Wire Size

12 gauge

TUV tested to CSA and UL Standard 499

N

CE

N

Control Type


Sentry Digital 12-key Non-Ceramic

Voltage

120

Hertz

60

Nema Details







Disclaimer: The specifications above assume that the kiln will be plugged into a dedicated circuit. Local electric codes supersede our recommendations.

The pricing and electrical specifications for the above products reflect their design for use in the United States. The International versions of most models will have variations in electrical specifications and price due to consumer safety requirements or electrical regulations.

 

Kiln Type

Controller

Sides

4

Understanding Chamber Measurements

Chamber Volume

0.00 CU.FT.
0.00 litres


The Outer Size of the Kiln and the Shipping Size: Width = Left to Right; Depth = Front to Back; Height = Top to Bottom

Outer Size

8.50W x 8.50D x 22.50H Inches
216W x 216D x 572H mm

Ship Size

12.00W x 12.00D x 25.00H Inches
305W x 305D x 635H mm

Ship Weight

10.00 Lbs.
4.54 Kg.

Ship Method & Notations

This item Ships Via UPS





Part Number

TNFII-19   * Base Model

Shopping Cart
Your cart is empty.
Mailing Lists