Hours of Operation

Mon-Fri: 9-5
Sat: 10-3
Closed Sundays

Browse Categories
Shop by Category

L&L Easyfire e18M-3

<< Previous in L & L Kilns Next in L & L Kilns >>

Price: $3,125.00
Manufacturer: L&L Kilns
Part No: E18M-3

More Options

* denotes required field

Select your voltage and phase*
Add a Vent-Sure Kiln Vent?

L&L Model E18M-3 Ceramic Kiln

The e18M-3 is a very versatile kiln from L&L. 

Model e18M-3 Easy-Fire Automatic Kiln with with Multi-Program Three-Zoned DynaTrol mounted in an easy-open cool-firing piggy-back control panel that is angled for easy viewing of control. Kiln comes with hard ceramic element holders, protected thermocouples, strong solid-top stand, and solid peephole plugs. 16-1/2" diameter by 22.5" high (3.2 cubic feet). 3" K23 brick. NEMA 6-50 single phase or 15-50 three phase 6 foot power cord included. C-MET-us listed in the USA & Canada. Cone 10 for all voltages

 Stainless steel wrapped around shaped firebrick. There are three adjustable clamps welded to each casing. All assembly is with stainless steel screws. The kiln sections sit on a separate stand.
 Spring loaded "Easy-Lift" lid opens with a feather-lite touch. The strength of the hinge allows the lid to rest back away from the opening without a support arm that would get in the way of loading the kiln.
 Heavy-duty 14 gauge full solid stand with multiple bends for strength. Legs bolt on with heavy 1/4-20 stainless bolts. The metal is aluminized for good corrosion resistance.
 proprietary brick coating is applied to all interior surfaces of the kiln. This is put on before the element holders are inserted. This coating penetrates the firebrick and fuses the surface on a microscopic level which helps prevent dusting and crumbling of the fragile firebrick.
 Solid ceramic peephole plugs with full 1” diameter. Three total: one per section.

 3" (76 mm) K23 Premium Firebrick
  Two 9" high & One 4.5" high sections
 8 sides
 3.2 cubic ft (190 Liters)
 260 pounds (154 Kg)
 16.5" Diam x 22.5" High
 Wide x 
 Deep x 
 High (71.12 cm Wide x 76.2 cm Deep x 152.4 cm High)
 Two control zones with two separate thermocouples. 
 8 Ga Type K Exposed Thermocouple in Mullite Protection Tube (4.5" long /114mm)
 Mounted on control panel
 All controls and components are mounted in a separate control panel that is piggy-backed to the element connection box. A layer of insulation and this separation helps keep the controls cool. The control panel and element box are hinged for easy access and maintenance. Control box can be easily removed for servicing. On/off switch and control fuse are included.
 Control box drops down perpendicular to kiln for easy access to wiring and controls. All electrical wires are color coded or numbered.

Zone control gives you the utmost in controllable temperature uniformity. The DynaTrol separately measures temperatures in the bottom, middle and top of the kiln and automatically adjusts the heat output of three zones during the entire firing.
DynaTrol with 4 Easy-Fire programs (Slow Bisque, Fast Bisque, Slow Glaze, Fast Glaze), 6 custom programs, PreHeat, Delay, Program, Segment Review, and Diagnostics. Zone control included on most kilns.
K23 firebrick combines good insulation with strength

The Quad element design improves element life by offering the largest element in the industry for top-loading craft kilns combined with L&L's patented hard ceramic element holders. 

APM elements increase element life in difficult applications like cone ten firing, or very long hold segments.

  • Part Number:  H-E-K18S/30
  • Includes: One 15" Full Shelf and Four 15" Half Shelves, Six each of 1/2", 1", 2", 4", 6", & 8" high 1-1/2" Ceramic Posts, and One Pair Heat Resistant Gloves

Part Number
Fuse Size
K-E-18M3/21 e18M-3-208-1P 8,000 208 Single Phase 50 Amp
K-E-18M3/22 e18M-3-208-3Ph 8,000 208 Three Phase (Delta) 40 Amp
K-E-18M3/31 e18M-3-240-1Ph 8,000 240 Single Phase 50 Amp
K-E-18M3/32 e18M-3-240-3Ph 8,000 240 Three Phase (Delta) 30 Amp

Genesis Upgrade

The new Genesis control from Bartlett includes a touch screen interface and WIFI connectivity added to the proven software of the DynaTrol. AVAILABLE NOW.


  1. Touch-screen technology for the user interface
  2. Easy-to-follow screen descriptions
  3. Different user-interface levels, which can be set to match the user’s firing knowledge
  4. Graphical display of the firing process right at the controller
  5. Store up to 12 custom user programs
  6. Up to 32 segments per program
  7. Ability to make adjustment during a firing such as add segments, add temperature, and skip segments
  8. Built in diagnostics testing for use with a current sensor
  9. Alarm
  10. Error Codes
  11. WiFi enabled for easy software updating
  12. Compatible with KISS computer interface
Note: It is only an option for kilns that normally come with a DynaTrol control.
Shopping Cart
Shopping Cart
Your cart is empty.

Contact Us
408-295-3352  Local

Instagram: @clayplanet