Hours of Operation

Mon-Fri: 9-5
Sat: 10-3
Closed Sundays

Browse Categories
Shop by Category

L&L Easyfire E23M-3

<< Previous in L & L Kilns Next in L & L Kilns >>

Price: $4,655.00
Manufacturer: L&L Kilns
Part No: E23M-3

More Options

* denotes required field

Select your voltage and phase*
Add a Vent-Sure Kiln Vent?

L&L Model E23M-3 Ceramic Kiln

The e23M-3 is a very versatile kiln from L&L. 

Model e23M-3 Easy-Fire Automatic Kiln with Multi-Program Two-Zoned Genesis Touchscreen control mounted in an easy-open cool-firing piggy-back control panel that is angled for easy viewing of control. Kiln comes with hard ceramic element holders, protected thermocouples, strong solid-top stand, easy-lift spring hinge, and solid peephole plugs. 22-3/8" diameter by 22.5" high (5.5 cubic feet). 3" K23 brick. NEMA 6-50 single phase or 15-50 three phase 6 foot power cord included. C-MET-us listed in the USA & Canada. Cone 10 for all voltages.

 Stainless steel wrapped around shaped firebrick. There are three adjustable clamps welded to each casing. All assembly is with stainless steel screws. The kiln sections sit on a separate stand.
 Spring loaded "Easy-Lift" lid opens with a feather-lite touch. The strength of the hinge allows the lid to rest back away from the opening without a support arm that would get in the way of loading the kiln.
 Heavy-duty 14 gauge full solid stand with multiple bends for strength. Legs bolt on with heavy 1/4-20 stainless bolts. The metal is aluminized for good corrosion resistance.
 proprietary brick coating is applied to all interior surfaces of the kiln. This is put on before the element holders are inserted. This coating penetrates the firebrick and fuses the surface on a microscopic level which helps prevent dusting and crumbling of the fragile firebrick.
 Solid ceramic peephole plugs with full 1” diameter. Three total: one per section.

 3" (76 mm) K23 Firebrick
 Three sections
 10 sides
 5.5 cubic ft
 290 pounds
 Diameter x 
 High (56.642 cm Diameter x 57.15 cm High)
 Wide x 
 Deep x 
 High (76.2 cm Wide x 101.6 cm Deep x 160.02 cm High)
 Download (PDF)
 Two control zones with two separate thermocouples. 
 8 Ga Type K Exposed Thermocouple in Mullite Protection Tube (4.5" long /114mm)
 Mounted on control panel
 All controls and components are mounted in a separate control panel that is piggy-backed to the element connection box. A layer of insulation and this separation helps keep the controls cool. The control panel and element box are hinged for easy access and maintenance. Control box can be easily removed for servicing. On/off switch and control fuse are included.
 Control box drops down perpendicular to kiln for easy access to wiring and controls. All electrical wires are color coded or numbered.

Zone control gives you the utmost in controllable temperature uniformity. The DynaTrol separately measures temperatures in the bottom, middle and top of the kiln and automatically adjusts the heat output of three zones during the entire firing.
The Genesis control includes a touchscreen interface and WIFI connectivity. The intuitive interface is easy to use and understand. Different user-interface levels can be set to match the user’s firing knowledge. A free phone app allows you to monitor your kiln remotely.
K23 firebrick combines good insulation with strength

The Quad element design improves element life by offering the largest element in the industry for top-loading craft kilns combined with L&L's patented hard ceramic element holders. 

APM elements increase element life in difficult applications like cone ten firing, or very long hold segments.

  • Part Number: 
  • Includes: One 20" Full Shelf and Four 20" Half Shelves, Six each of 1/2", 1", 2", 4", 6", & 8" high 1-1/2" Ceramic Posts, and One Pair Heat Resistant Gloves

SKUModel NumberWattsVoltsPhaseFuse SizeK-E-23M3/21e23M-3-208-1Ph9,985208Single Phase60 Amp
  • Additional Information
  • Amps: 48
  • Wire Connection: NEMA 6-50 1 Phase Plug with six foot cord. Neutral is not used. (Kiln may be direct wired without affecting the MET listing)
  • Wire Gauge for Connection: 6 Ga
  • Branch Fusing: Not Branch Fused
  • Element Wiring: Parallel
  • Max Temperature: Cone 10, 2350F, 1290C
  • Certifications
  • International: Made for all markets except EU
  • CE: Not CE certified
  • UL499: c-MET-us listed to UL499 Standards in the US and Canada
  • Wiring Diagram(s): 
K-E-23M3/22e23M-3-208-3Ph11,520208Three Phase (Delta)50 AmpK-E-23M3/31e23M-3-240-1Ph11,520240Single Phase60 AmpK-E-23M3/32e23M-3-240-3Ph11,520240Three Phase (Delta)50 AmpK-E-23M3/41e23M-3-220-1Ph10,560220-230Single Phase60 AmpK-E-23M3/52e23M-3-380-3PY11,520380Three Phase (Wye)30 AmpK-E-23M3/82e23M-3-400-3PY13,082400Three Phase (Wye)30 AmpK-E-23M3/72e23M-3-415-3PY11,520415Three Phase (Wye)25 Amp


  1. Touch-screen technology for the user interface
  2. Easy-to-follow screen descriptions
  3. Different user-interface levels, which can be set to match the user’s firing knowledge
  4. Graphical display of the firing process right at the controller
  5. Store up to 30 custom user programs
  6. Up to 32 segments per program
  7. Ability to make adjustment during a firing such as add segments, add temperature, and skip segments
  8. Built in diagnostics testing for use with a current sensor
  9. Alarm
  10. Error Codes
  11. WiFi enabled for easy software updating
Shopping Cart
Shopping Cart
Your cart is empty.

Contact Us
408-295-3352  Local

Instagram: @clayplanet