Browse Categories

Evenheat HT-1 Heat Treat Kiln

<< Previous in Knife Making / Heat Treating Kilns Next in Knife Making / Heat Treating Kilns >>

MSRP: $2,139.20
Price: $1,959.66
You Save: $179.54
Manufacturer: EvenHeat Kilns
Part No: HT-1

More Options

* denotes required field

Select Voltage & Phase*
Select your Controller*
free shipping

Evenheat HT-1 Heat Treat Furnace


13.5" Deep x 13" Wide x 13.5" High - 1.37 Cubic Feet

(34.3cm Deep x 33cm Wide x 34.3cm High - 38.8L)


19" Deep x 24" Wide x 27.5" High (includes the 8" stand)

(48.3cm Deep x 61cm Wide x 69.9cm High)


240 Volts, 18 Amps, 4320 Watts, or optional 208 Volts. 60Hz, Single Phase Only

Power Cord Plug Configuration - NEMA 6-20

Consult with an electrician for proper fuse panel, service wire size, receptacle, and fusing requirements. This model, used for its intended and expected purpose, would not be defined as "continuous use". Continuous use is defined as continuous, full power on for 3+ hours.

Select from 3 Controllers

  • Set-ProThe Set-Pro is our economical, 3 button control and features a 4 digit display. It contains 4 program slots to store your favorite heat treat programs. To recall them just select your User number and you're ready to go.Programming of the Set-pro is accomplished using Up, Down and Enter keys.The Set-Pro can be used with our Quiet Drive Solid State Relay System, however it does not offer the ability for tight temperature control.

  • Rampmaster 3The Rampmaster 3 is our traditional full featured control and features a 4 digit display. It contains 12 program slots to store your favorite heat treat programs. To recall them just select your User number and you're ready to go.Other features include a numbered keypad, program review key and the ability to work with our Quiet Drive Solid State Relay System.

  • TAPThe TAP is our premier temperature controller: its wonderfully simple operation, excellent control capability and well laid-out touchscreen just rock.
    The TAP is, by far, the best performing and best selling heat treat temperature control.
    Nowhere is simple-use more evident than in the single touch needed to access your heat treat programs. Just touch the Start key and all of your programs are immediately displayed for selection. Programs are displayed in full, easy to read text.Creating your heat treat programs follows this relaxed feel as well. The TAP walks you through the process with on-screen displays and text that are easily understood and followed. Once created, your programs stay as long as you want them.
    The TAP has lots of room so feel free to create as many as you wish.
    Temperature control is tight and on the mark. Overshoot and ripple are kept to a bare minimum, particularly when coupled with our Quiet Drive Solid State output. Consistency is not an issue as the TAP performs reliably time after time.
    The manufacturer of the TAP (SDS Industries) has created an App for the TAP which is available in both iOS and Android. Access to the app is available through the TAP's built-in USB Wi-Fi or Ethernet ports.



  • Quiet Solid State Relay - All HT models are available with our optional Quiet Drive Solid State Relay. Solid state relays are special switches used to turn the heating elements on and off. Solid state relays enhance control performance, extend the life of the heating elements and are expected to last the life of the oven.

  • MK2 Blade Fixture - Our blade fixtures were designed specifically to hold your blades vertically and securely. They're stable and are designed to provide ample space for foil wrap inflation. Our MK 2 Blade Fixture is designed to fit the HT Series chambers.

  • LOUD AlarmCut through your shop noise with our Loud Alarm Option. The Loud Alarm sounds at an irritatingly loud 80db. It will definitely get your attention so you'll never miss the opportunity to properly quench again.

  • Door Shut off Switch - Cuts power when door is opened for safe operation. Highly recommended!

Shopping Cart
Your cart is empty.
Mailing Lists