| | |
|
| |
| | |
|
|
L&L Fuego F1418
|
|
Manufacturer: L&L Kilns
Part No: F1418
|
L&L FUEGO F1418 KILN
Small Home Kiln Designed For Home Hobby/Craft Pottery Up To Cone 10
The FUEGO Craft Kiln reaches Cone 10 (2350ºF) with power to spare. This ideally sized home craft kiln uses a minimal 240 volt 20 amp circuit. Includes simple One-Touch™ program control. Great for apartments or houses with smaller power systems.
The FUEGO has the full range of premium L&L features such as hard ceramic element holders, Type K 8 gauge thermocouple with ceramic protection tube, full support 14 gauge aluminized steel stand, two solid peephole plugs with full 1” view, proprietary reflective brick coating that protects brick and minimizes dusting, and three-year limited warranty. Brick thickness is 3” and also includes a layer of non-RCF fiber between the stainless steel case and firebrick for extra insulation, a door shut-off switch for the elements, and an extra peephole plug in the top for venting.
Initially designed for the international market where home voltage is typically 240 volts and either 13 or 15 amps the Fuego and Robin and available for the USA market with a 16 amp 240 volt design. The USA Fuego will heat Cone 10 in 3-1/2 hours!
Temperature: 2350ºF, Cone 10
Cubic Feet: 1.5
Inside Diam: 13.5” Inside Height: 18"
Outside Dimensions: 22” W x 27” D x 31” H
Options
- Furniture Kit: Includes three 12” diameter full shelves
and four each of 1”, 2”, 4” and 6” triangular posts plus
1 lb of Cone 10 kiln wash.
- 240, 220 or 208 single phase are all standard
options. 3 phase not available. No Charge for any
voltage options.
| Model No |
Cubic Ft |
Inside Dim (Inches) |
Description |
| F1418-3 Hobby Kiln
|
1.5
|
13.5" Diam x 18" High
|
Cone 10 / 1285°C / 2350°F
One Touch 3-key Controller
|
|
|
|
|
Features
Durability
Durability, Repairability, Better Heat Transfer. The smooth, hard surface of the inside ceramic channel allows the elements to expand and contract freely. No pins! The dense ceramic holders extend element life because they do not insulate the hot elements from the kiln interior.
Mullite protection tubes extend thermocouple life and keep kiln clean. The mullite protection tube keeps the metal oxides of the thermocouple tip from dropping off and contaminating your work.
Industrial grade ceramic terminal blocks make changing elements easy.
Aluminized stands are extremely strong and corrosion resistant. The offer solid support under the kiln - unlike spot-welded angle stands that are common in the industry.
Thick 8 gauge thermocouples last a long time. Special Limit of Error to ANSI MC96.1 specifications is used.
Special brick coating hardens and seals brick for durability and cleaner operation.
Stainless Steel clips help the lid stay secure and durable. This extra step ensures that the lid won't slip out of the stainless steel band.
Corrosion resistant materials and methods result in a long-lasting kiln.
Three case clamps per 9" high kiln section are redundant safety for your L&L kiln.
Performance
K23 firebrick combines good insulation with strength
Ease Of Use
Four-Key Control that Redefines Simplicity • Perfect for Schools & Hobbyists.
OR Dynatrol Full Controller with 4 easy preset firing programs for bisque and glaze firing
Six Ramp and hold custom programs, preheat, delayed start, program review, and diagnostics!
Solid large non-tapered peepholes allow a wider view into the kiln.
This is used on top-loading kilns that are 8 sided or less |
|
|
|