Paragon Fusion-8 Glass Fusing Kiln

Paragon’s new Fusion-series digital hot glass kilns are packed with exciting features. 

The Fusion-series lid elements use a new element groove that eliminates element pins. The element coils are wider than the groove opening, so the elements stay in place without pins.

A heavy galvanized steel base covers the reversible brick bottom completely. It folds up under the stainless case on all sides to strengthen the firing chamber. This is one more assurance that your Paragon kiln is built to last.

Features of the Sentry Xpress 3-key Controller on Paragon Glass Kilns

• Design programs with up to 8 segments (steps) in Ramp-Hold mode.
• Fire to a single temperature at a single speed in the simplified Single Speed mode.
• Ramp-Hold mode can store 4 programs.
• Skip a segment in Ramp-Hold during firing without having to stop the kiln to reprogram.
• Change the target temperature in Ramp-Hold during firing without having to stop the kiln to reprogram.
• Hold (soak) the temperature in both Single Speed and Ramp-Hold. Experiment with Hold to improve color saturation of china paints.
• Add Hold Time during firing without having to stop the kiln to reprogram.
• Control both heating and cooling in Ramp-Hold.
• Program Review lets you check the program you are about to fire.
• Program the Temperature Alarm to sound when the kiln reaches a specific temperature. Use this to remind yourself to check on the kiln.
• Temperature display throughout firing and cooling in your choice of °F or °C
• Thermocouple Offset adjusts the thermocouple readout.
• Set the Delay to turn on the kiln later to suit your schedule.
• Error Messages report mechanical problems such as a disconnected thermocouple, stuck relay or broken element.
• 12 Month Warranty
• LED Lights show whether you are in program, review, or firing mode.
• Colorful, illustrated instruction manual. Download it from the “Additional Information” section below to review these features in more detail.

Upgrade your Digital Controller to a Sentry 12 Key

The Sentry 12 Key Controller is a optional upgrade that gives you more ramp and hold segments for greater control.

The Optional Fusion-8 Furniture Kit

Glass must be fired on a ceramic shelf; never directly on the kiln firing chamber bottom.

1 - C-22 - 21” Round Shelf
4 - 1” wide Square Posts, ½” long
1 lb. Bag Glass Separator

Optional Glass Viewing Window

Watch the bright red kiln interior through the optional 1” x 3” high-temperature glass window. (Note: always wear firing safety glasses when viewing the kiln interior.) Conveniently watch your glass treasures progress through every stage from tack fuse to full fuse.

Optional Lid Safety Switch

The optional lid safety switch turns off power to the heating elements when the lid is raised. The controller remains powered. The switch turns the power to the elements back on when the lid is closed. The switch mounts to the back of the lid. IMPORTANT: The lid safety switch is required in some areas such as Canada and Europe.

Optional Mercury Relay Upgrade

Order your new kiln with the mercury relay upgrade, which is a single TF-26 mercury relay. The mercury relay is quiet and reliable. The life of a mercury relay has been measured in millions of on/off cycles. Mercury relays outlast the standard mechanical relays and are available as an option on new kilns.

Optional Fiber Lid Upgrade

The Fusion-series glass kilns can be ordered with an optional ceramic fiber top in place of the firebrick top. Serious glass artists have long requested the fiber top for their firebrick kilns. The ceramic fiber lid includes a deluxe brushed stainless steel outer lid cover. (The photo shows the Fusion-8 but represents all Fusion models. Note: The price above is only for a fiber lid ordered with a new kiln. 

Kiln Specifications

Max. Temperature 1700F 926C Amps 30 Phase 1 Watts 7200 Nema 6-30P Breaker Size 40 Circuit Copper Wire Size 10 gauge TUV tested to CSA and UL Standard 499 Y CE N IMPORTANT: Some areas such as Canada and Europe require a lid or door safety switch on kilns. Control Type Sentry Xpress 4.0 Digital 3-Key Voltage 240 Hertz 60 Disclaimer: The specifications above assume that the kiln will be plugged into a dedicated circuit. Local electric codes supersede our recommendations. The pricing and electrical specifications for the above products reflect their design for use in the United States. The International versions of most models will have variations in electrical specifications and price due to consumer safety requirements or electrical regulations.

Kiln Type Top Loading Round Sides 10 Understanding Chamber Measurements Chamber Volume 2.86 CU.FT. 80.99 litres Chamber Width 23.50 IN 597 mm Chamber Depth 11.00 IN 279 mm The Outer Size of the Kiln and the Shipping Size: Width = Left to Right; Depth = Front to Back; Height = Top to Bottom Outer Size 30.50W x 39.50D x 35.00H Inches 775W x 1003D x 889H mm The external kiln height includes a 18.5" tall stand. Ship Size 36.50W x 38.00D x 24.50H Inches 927W x 965D x 622H mm Ship Weight 205.00 Lbs. 92.99 Kg. Ship Method & Notations This Kiln Ships Via Truck Part Number 49611J3EGA   * Base Model