Browse Categories

Paragon Iguana Kiln

<< Previous in Paragon Kilns Next in Paragon Kilns >>

MSRP: $6,333.78
Price: $5,699.00
You Save: $634.78
Manufacturer: Paragon Industries
Part No: 7261111G00

More Options

* denotes required field

Select Voltage & Phase*
Select Color*

Paragon Iguana

The Iguana is powered with reliable extra heavy-duty elements. This results in long element life, because the elements do not “struggle” to reach high temperatures. 10,800 watts heat the 18” wide, 18” deep, 22 ½” high interior to a full cone 10.

Easy Installation:
The 240/208 volt Iguana plugs into a standard 6-50R outlet, so you can fire it on the outlet most studio kilns already use.

Easy to Load:
The Iguana is easy on the back muscles. With the optional 22” stand, the interior floor height is a comfortable 34 ½”.
Industrial-gauge elements are seated and protected in dropped, recessed firebrick grooves. The elements are easy to replace, because you can comfortably reach into the kiln.

Potters and ceramists who struggle with top-loading kilns will enjoy the Iguana. The door swings open wide on a heavy ½” steel rod with sealed bearings. A spring-loaded latch presses the door tightly closed. A recessed firebrick lip around the door seals in heat.

The Sentry digital controller is manufactured by Orton Ceramic Foundation. It is unsurpassed in reliability for a controller in its price range. It includes a programmed cool-down, Cone-Fire and Ramp-Hold modes, and is capable of accepting types K, R, or S thermocouples. A type-K thermocouple with an Inconel® sheath comes standard. We also recommend the optional Type-S for stoneware and porcelain.

Do you ever wonder how much electricity your kiln uses? The digital controller will figure this for you; merely program the kiln’s wattage and your cost of electricity into the controller. Learn to conserve energy by experimenting with firing speed, load density, etc.

For your peace of mind, the Iguana includes a safety switch that shuts off power to the controller when not in use.

The ventilated switch box is generously louvered for air circulation for the long life of the electrical components. Yet dust is kept to a minimum.

Options

  • Door Safety Switch - The optional door safety switch turns off power to the heating elements when the door is opened. It mounts to the top of the door hinge shaft.
  • 22” tall stand  - Full welded steel stand for the IGUANA measures 24.5 X 22 X 22H, W/O casters
  • Casters for stand
  • Type-S Thermocouple
  • Stainless steel finish
  • Orton Kiln Master Vent, which mounts to the back of the kiln. Mounting holes are drilled in every Iguana for easy installation.

Iguana Features

  • Saves electricity with 3” firebricks
  • Cone 10, 2350°F
  • Type-K thermocouple with ¼” sheath, or optional type-S
  • Sentry 2.0 controller with programmed cool-down
  • Two tapered peepholes in the side give a wide view of the interior with little heat loss.
  • Available in 208, 240, volts, 1 & 3 phase
  • Proportional power elements for more even heating
  • Heavy-gauge steel completely covers the bottom under the firebricks for extra strength.
  • 1 ½” air gap between the switch box and kiln; electrical components stay cool and last longer
  • Built-in fuse protects the controller
  • Four hand-lifts
  • Chamber Volume

    4.20 CU.FT.

    Chamber Width

    18.00 IN

    Chamber Depth

    18.00 IN

    Chamber Height

    22.50 IN

    Outer Size

    36.00W x 31.30D x 60.00H Inches. The external kiln height includes a 22" tall stand.

    The Optional Iguana Furniture Kit

    The furniture kit consists of carefully selected fireclay shelves and posts for this particular model. The furniture allows you to stack multiple layers of ware. The Iguana Furniture Kit consists of:
    3 C-17 full shelves (16” x 14” x 5/8”)
    1 C-17H half shelf (8” x 14” x 5/8”)
    1” wide square posts, 4 each in lengths of ½”, 1”, 2”, 3”, 4”, 5”, 6”
    1 lb. bag kiln wash
    Furniture Shipping Weight: 50 lb.

    Optional AOP Outlet
    The “Auxiliary Output” is available on most Paragon TnF kilns. The AOP is a relay-powered electrical receptacle mounted to the kiln. You can plug an Orton KilnVent into the AOP to control when the vent turns on during firing.
    Optional Kiln Stand

    22” tall stand (pictured) The stand is not necessary if you have a table, or work bench able to support up to 600 lbs.

    Optional Sentinel touch-screen controller

    This kiln can be ordered with the optional Sentinel Smart Touch controller instead of the standard Sentry 3.0 12-key controller. 

    Optional Door Safety Switch

    The optional door safety switch turns off power to the heating elements when the door is opened. The controller remains powered. The switch turns the power to the elements back on when the door is closed. IMPORTANT: The door safety switch is required in some areas such as Canada and Europe.

    Optional Type-S Themocouple

    Optional Type-S premium-grade thermocouple for single-zone 2 1/2" - 3" wall kilns. Ideal for firings above cone 4. It is extremely long lasting even at stoneware temperatures.

    Optional Orton KilnMaster 120 Kiln Vent

    The patented Orton Vent Master not only vents fumes but also improves firing results. 

    Optional colors at no extra charge

    Brighten your studio with color! Order your kiln in one of our standard colors at no extra charge . . . berry, black, blue, hot pink, jade, navy, purple, or turquoise.




    Shopping Cart
    Your cart is empty.
    Mailing Lists