Hours of Operation
Mon-Fri: 9-5
|
Skutt KM-1027-3
MSRP: $4,915.00
Price: $4,199.00
You Save: $716.00
Manufacturer: Skutt
Part No: KM-1027-3
More Options
* denotes required field
Select your voltage and phase*
|
|
SKUTT KM-1027-3 or KMT-1027-3
Skutt current lead time is 8 weeks for most kilns.
Sometimes called the energy saver the KM 1027-3 is known for its ease in reaching cone 10. With it's 3 inch fire brick it is able to reach cone 10 in 240 or 208 volt single or 3 phase time and time again. The KM 1027-3 firing chamber at 6.4 cubic feet provides plenty of room for larger stoneware or porcelain loads. Available in single or 3 phase models.
NOTE: When ordering shelves, remember to look for 3" referred shelves.
Electrical Requirements SINGLE Phase
240 Volts 48 Amps 11520 Watts
208 Volts 48 Amps 9980 Watts
Copper Wire Size: 6
Breaker Size: 60
NEMA Receptacle Configuration: 6-50
Electrical Requirements THREE Phase
240 Volts 29.3 Amps 11520 Watts
208 Volts 31.7 Amps 11000 Watts
Copper Wire Size: 8
Breaker Size: 40
NEMA Receptacle Configuration: 15-50
Platinum Type-S Thermocouples are available installed on your kiln for a much longer lasting life than a type K. No fine particle dusting off. High accuracy.
APM Elements offer a much longer lifetime when firing higher temps from cone 6 to 10 on a regular basis. The elements are less likely to collapse and degrade.
Rolling kiln stands are constructed out of heavy duty, welded square tubing and fitted with high quality, locking polypropylene castors. Polypropylene wheels roll smoothly across the floor. They provide the recommended clearances from the kiln to the floor
Packed with the kiln you will find the following items:
● Kiln Stand
● Instructional Video
● Operating Manual
● Stand Feet
● Extra Thermocouple (unless Type S)
● Warranty Card
● Peep Plugs - attached to the kiln stand, enough to fill each peephole on your particular model.
|
RF-258
20"x19"x5/8" Decagon 3" Kiln Shelf
|
RF-259
20"x9.5"x5/8" Half Dec 3" Kiln Shelf
|
FK-10-3
8 half shelves - 6 posts each 1" to 6" (36 total)
For 22" wide 3" thick wall top loading decagon kilns or 10-sided round gas kilns
|
Price: From $4.00 to $49.00
Kiln Wash sold by the pound.
|
Price: From $9.00 to $50.00
Western Pint or Gallon Size
|
Envirovent-2
MSRP: $755.00
Price: $699.00
You Save: $56.00
Skutt Envirovent 2 Kiln Vent, 115 Volts
|
Skutt EnviroLink - Automatic Vent Controller
|
EasyView
MSRP: $39.87
Price: $39.00
You Save: $0.87
Optional slanted mount for Skutt control panel
|
|
| | |
| Shopping Cart
Your cart is empty.
| |
| | |
|
Contact Us
|
|