Skutt KM-818-30A-3

With a thicker 3" wall, your eight sided Skutt kiln can give you precise high firing control that was available only on top of the line models just a few years ago. It is a versatile Cone 8 kiln that is a great work tool for porcelain and stoneware artists. Easy to move and economical to operate, the KM-818-30A-3 is the perfect kiln for home studios where you only have access to a 30 Amp Breaker commonly found in homes with a Dryer type plug.

KILN SPECS
2.3 Cubic Ft.
17" x 17" Wide X 18" Deep
Maximum Cone: 8, 2300 F

Electrical Requirements
240 Volts 21.7 Amps 5200 Watts
208 Volts 24 Amps 4990 Watts
Copper Wire Size: 6
Breaker Size:  30
NEMA Receptacle Configuration: 6-30

Platinum Type-S Thermocouples are available installed on your kiln for a much longer lasting life than a type K. No fine particle dusting off. High accuracy. 

APM Elements offer a much longer lifetime when firing higher temps from cone 6 to 10 on a regular basis. The elements are less likely to collapse and degrade.

Rolling kiln stands are constructed out of heavy duty, welded square tubing and fitted with high quality, locking polypropylene castors. Polypropylene wheels roll smoothly across the floor. They provide the recommended clearances from the kiln to the floor.

Packed with the kiln you will find the following items: 
● Kiln Stand   
● Instructional Video   
● Operating Manual   
● Stand Feet   
● Extra Thermocouple (unless Type S)   
● Warranty Card   
● Peep Plugs - attached to the kiln stand, enough to fill each peephole on your particular model.