Browse Categories

Smart Clay Dryer

<< Previous in Chinese Clay Art Tools Next in Chinese Clay Art Tools >>

Price: $120.00
Manufacturer: Chinese Clay Art
Part No: BB120


For the Ceramic Studio of Next Generation, to take clay works from wet to bone dry evenly and more quickly that drying process possible within overnight. 
Three tools in one: Damp Cover, Breathable Board and Smart Heater. 

Finished unfired wet clay artwork is called "green-ware." Because water sinks downwards while water vapor evaporates upward, the upper side of the clay body dries faster, and the lower part of the clay body dries more slowly. The drying process is not uniform, and this is one of the common reasons for cracking of the clay body. Smart Clay Dryer is able to make wet clay artworks dry evenly and quickly. 

DAMP COVER with adjustable vent. It maintains a moist environment, to prevent water from evaporating too quickly from the top. The adjustable vent allows the moisture to go through slowly. 

BREATHABLE BOARD. The Board is perforated with many holes in order to aid with moisture evaporating from the bottom of the clay body. SMART HEATER. The Heater helps the clay body to dry evenly and quickly no matter the surrounding climate, whether it be during a cold winter or a hot and humid season. Please Read through the instructions carefully before using the product. 

It is strongly recommended to place running appliance onto a heat-resisting surface (ceramic titles, thick board, etc.) before and during operation to avoid issues. 
1, Use the appliance only for its intended use and always follow the guidelines in this manual. 
2, Improper use of the appliance may cause properly damage or physical injury. 
3, Put the appliance only on flat surface. 
4, Keep the power base away from water. Do not switch on the appliance if its surface are wet. Make sure the appliance is dry before using. 
5, Do not allow children to use the appliance without close supervision. 
6, Do not leave the appliance running continuously for more than 40 hours to avoid overheating. 
7, Do not cover the appliance during the operation or if it is still hot after the operation. 
8, Unplug the appliance before cleaning it. 
9, Unplug the appliance when it is not in use. 
10, Use the appliance only for individual ceramic studio purposes. It is not designed for commercial use. 

Put the pieces on the breathable board properly with no over reached the space limit. 
Put the cover on the top and make sure the cover top vent is fully opened. 
Plug in and turn on the appliance by flipping the power switch to “ON”.  
Set the temperature what you desire. Start on lowest setting and increase hourly. 
When you finish using the appliance, turn it off by flipping the switch to “OFF”. 
Unplug the appliance and let it cool down before covering it or before you put it away. 
Note: The drying hours will vary depending on the moisture content, form thickness and type of clay body. Keep records and adjust accordingly. 

Product Name Smart Clay Dryer 
Item No. BB120 
Maximum Temperature 155 °F / 68 °C 
Power Consumption 245 watt Rate Voltage 120 Volts, 60 Hertz 
Product Dimensions 17” height, 12.5” diameter 
Origin China 

This product has warranty against defects in materials and workmanship for 90 days from date of purchase. 
QUALIFICATION FOR WARRANTY Proof of purchase must be presented within 90 days from the date of purchase. Defect must not be due to accidental damage or misuse of repair made of unqualified engineers. This Warranty does not cover any claims for potential damage or loss. These statement does not cover affect your statutory rights as a customer.  
Shopping Cart
Your cart is empty.
Mailing Lists