Browse Categories

Studio Model – 1.5 HP Soldner Clay Mixer

<< Previous in Soldner Clay Mixers Next in Soldner Clay Mixers >>

Price: $5,585.00
Manufacturer: Muddy Elbow Manufacturing
Part No: Studio

Product Options

Voltage & Phase:

SOLDNER CLAY MIXER - STUDIO MODEL

Select your power option above. 

Soldner Clay Mixers are still being manufactured with the same quality construction developed by founder Paul Soldner. 

Most Soldner mixers are still in service, even some of the earliest ones built more than 30 years ago. Every effort is made to insure this same quality in every new mixer.

Soldner clay mixers are a fast and efficient way of mixing fresh clay from powder or reprocessing scrap clay into a useable consistency. There are no sharp blades or augers but rather the clay is pushed against the stationary mixing bars by a slowly rotating concrete tub. 

The concrete tub itself is a unique feature as it can be used for storage or as a reclaim barrel. Clay can even be allowed to dry out in the mixer without problem: when the tub becomes wet, the dried clay will release from the walls. Any combination of scrap, slop, dry materials and hard clay can be remixed and homogenized in no time because the concrete absorbs excess water and redistributes it to the drier materials while the blades chop and wedge.

The Soldner "rotating drum" system does a very efficient job of reconditioning clay scrap. The Soldner will not dump the clay out, but the blade configuration cuts the clay in such a way that it can be lifted out without digging. We suggest that you place the unit up on cement blocks (8" off the ground) to make clay removal easier


Soldner Clay Mixer Details

Model

Studio

Professional

Motor 1.5 HP 3 HP
  Available Studio Motors Available Pro Motors
120V
1 Ph.  12.4
Amps* 
208V
1 Ph.
6.8
Amps
208V
3 Ph.
5
Amps
240V
1 Ph.
6.2
Amps
240V
3 Ph.
4.6
Amps
208V
1 Ph.
15.5
Amps
208V
3 Ph.
9.1 Amps
240V
1 Ph.
14
Amps
240V
3 Ph.
8.4
Amps
460V
3 Ph.
4.2
Amps
*Requires dedicated circuit.
Mixing Capacity 150 lbs. wet 300 lbs. wet
Tub (concrete) 23" D x 15" H O.D. 30" W x 17" H O.D.
Cutter Bars Two, 1" stainless steel Three, 1" stainless steel

Frame (welded Steel)

28" W x 34" D x 31" H 40" W x 48" D x 31.5" H

Shaft & Bearings

1-7/16" x main bearing 1-7/16" x main bearing
Safety Open Lid Shut Off, Guards Open Lid Shut Off, Guards
Warranty  5 years on tub, 1 electric 5 years on tub, 1 electric
Ship Weight 650 lbs., crated 1,000 lbs., crated
List Price $5585.00 $6792.00
Shopping Cart
Your cart is empty.
Mailing Lists