Browse Categories

Olympic 1827E

<< Previous in Olympic Kilns Next in Olympic Kilns >>

Bartlett 3K and V6CF ControllersGenesis Touchscreen Controller
MSRP: $1,790.00
Price: $1,610.00
You Save: $180.00
Manufacturer: Olympic Kilns
Part No: 1827E

More Options

* denotes required field

Select Controller*
Select Voltage and Phase*

Olympic 1827E

Olympic Model - 1827E Stackable Electric Kiln 240 or 208 volt, inside dimensions: 17.5" wide x 27" deep, fires to cone 8/2300°F; cone 10 version available

Stackable electric models are built with Olympic’s proven electrical box design which has heat shields with top and bottom perforations to keep the electrical components cool, and balanced heating elements insure even heating of the firing chamber under all firing conditions.

These models come equipped with pilot light, metal stand, stainless steel jacket, and Bartlett 3K-CF electronic controller.  Data is entered by scrolling through the up and down buttons for the desired cone fire or ramp/hold programming. Two Year Limited Kiln Warranty for cone 8 models, One-year Limited Kiln Warranty for cone 10 models.

Options include upgrading to the Genesis touchscreen controller or the 12 key digital Bartlett V6-CF controller for more ramp-hold user programs and multiple features including delay start, preheat, cone offset, skip step and many more for precise firings every time.  Messages and Information are available for reviewing a firing profile before or during the firing, viewing the current segment the firing is in, and cone table for easy look up of temperature and cone number equivalents.  Additional options include Type S thermocouple, 480 volt, 2 or 3 zone control, vent, and much more! 

Furniture Kit for 1827E - 1 - 15.5” x 15.5” octagon shelf, 4 - 15.5” x 7 3/4” half shelves, 6 ea 4, 6, 8 inch small square posts, 1 lb bag kiln wash

Type S thermocouple for extreme precision and longer life. + $275

Lid lifting assist + $290

Lid Safety Power Cutoff Switch + $140

Rolling Kiln Stand Castors + $175

Specific Kiln Information

Model 1827E  Wiring Specifications 1 Phase 3 Phase
Equipped with Lid Lift Assist Optional Volts 208 240 208 240
Inside Chamber Dimensions w x d x h (inches)  17.5 x 27 Amps 36   31  24 21 
Cubic Feet 3.95  Watts 7,560    
Outside Dimensions with Stand or Frame w x d x h (inches)  30.5 x 40 Breaker Required 50 Amp   40 Amp 30 Amp  
Brick Thickness 2.5” Plug Configuration NEMA 6-50   Direct Wired  
Maximum Temperature Cone 8 - 2300°F/1260°C Copper Wire Size #8, #6 if circuit is longer than 40 ft    
Est Ship Wt 250 lbs

Shopping Cart
Your cart is empty.
Mailing Lists